I really need to stop pestering you. I'll try to take my next questions over to KLOV, lol.
Lets start with Magic Sword. I pulled out and reseated all the ROM chips (which got scary when I realized how easy those pins get bent, lol), still get that weird artifacting. I'm gonna try to order new ROMS for the board. Where do I do that at?
Next up, play 1 jump button isn't working (the blue one in the pics). I switched the connectors for attack and jump around to verify that the button itself worked, which it does when the connectors are switched (that means blue works when switched for attack, and red does nothing). I switched the connectors to their original spots, and than cut the wire and put a new connector on the end. Still not working. Should I cut the wire back further, or is it possibly an issue with the JAMMA connector? Or could it be another problem related to the glitchy ROM ships?
I also included a pic of the board so you can see if its something obvious I messed up.
Next up, S.C.I., which seems to not even power on after transporting it. There's a small board on the side of the cab, which wire is disconnected, but I can't locate where it would plug in at. Pic Below.
From the markings on the board, I am guessing this is meant to be monitor controls? Here's a pic of the base of the monitor, but I don't see an obvious area where it would plug in.
Another area is a board on the bottom of the cab. There's what looks like a 110 outlet that has two fuses beside it, with nothing plugged into it, and no obvious wires that end with anything that could plug in there. Also, I know the box in the upper right hand part of the board is the power supply, but have no clue about the other two, which seem to have some kind of large coil on each of them.
Finally, here's a pic of the S.C.I. board itself. Above are two boards which are labeled AUX Power Supply, and another board that I'm not sure what the function is.
So, is this still something I can do, or am I too dense to figure this out? Sorry if I am pestering you too much....